
You need a branded microphone and you need it fast. Order by 5pm on a Tuesday and it is ready on the Thursday for collection in Kilcoole, Co. Wicklow, or out with a courier for next day delviery.
A microphone flag is the small piece of branding that sits at the top of the microphone handle. It is the square four sided block you see on every interview. It is not the foam cover that goes over the microphone itself, and it does not touch the part you speak into.
Why they are called flags
They work the way a flag works on a flagpole, or the way you would mark a ship. Unlike something sitting on a desk, or a backdrop behind you, the flag moves with your reporter. Wherever the microphone goes, your brand goes with it, and it is in every frame.
When Red Bull do an interview after the cliff diving, that logo is on every piece of video and social that comes out of it. That is the whole job of a mic flag. Microphone branding is the cheapest thing on a shoot and it is the only bit that ends up in every single frame. There is no mistake about who you are recording on behalf of.
Two logos, one flag
Your logo goes on all four sides as standard. But you can also run two different logos: logo one on opposite faces, logo two on the other pair.
That is how you get your logo and the broadcaster's in the same shot, or the broadcaster's and the sponsor's, whichever way the microphone turns. If you are handling two stakeholders on one job, this is the answer, and it costs nothing extra.
Black base or white base
We print on a black base or a white base. On black we lay down a white layer of ink first and print your logo over that, so the colours hold rather than sinking into the black.
Either way we need vector artwork. That is not us being fussy about file types. At this size, on this material, a low resolution logo shows.
It matters more than usual on a two day turnaround. If we are up against a deadline there is no point spending a day going back and forward about a file, because that comes straight out of production time. Send vector first time and the two days hold.
What we cannot do, and the way around it
People often ask for the colour to run the whole way around the flag. Our machines cannot print around a corner. That is a limit of the process, not a preference.
If you need a solid colour on every face, the way to do it is to print a base colour onto vinyl, wrap that around the flag, and then print your logo on top. It works, and it looks right. It is an extra process, so it runs on its own turnarounds: three days instead of two, or six instead of five. Tell us when you order rather than after, because it cannot be added later without moving your date.
Will it fit your microphone
Two numbers matter. Each printed face is 70mm square, so that is the space your logo has to work in. The hole through the middle takes a microphone body up to 42mm thick, and the foam inside grips the handle as it slides on.
It is sized around an SM58, which is the microphone most people already own, so anything around that size will fit.
Have a look at your microphone before you order. It takes a second and it saves the awkward conversation later.
Pair it with a backdrop
A mic flag puts your logo in shot wherever the microphone points. Put a curved backdrop behind the person answering and you have a portable interview studio: branded in front of the camera and branded behind it, packed into a car boot.
Podcasts
Podcasters use them too. If your microphone hangs upside down on a boom, as most podcast setups do, just flip the flag around. It reads the right way up on camera either way.
Whose logos have been on them
Heineken, Red Bull, Fine Gael, and government agencies. Fine Gael's social media team order them, and when they interview their own members in the Dail the logo is front and centre on the flag. A lot of this is internal content creation rather than broadcast: teams making their own video, where the microphone still needs to say who is asking the questions.
Two day or five day
Most mic flags are a rush, so there are two turnarounds.
Five days is standard. Two days is the one most people want. Order by 5pm on a Tuesday and it is ready on the Thursday for collection, or we send it out with a courier. We start production the following morning, so 5pm is a real cut-off rather than a polite one.
Whichever you are on, the artwork has to be right first time. See the specification below.
Branded Microphone Flags
Place your order within
and we will dispatch your order on
What customers say
Really good print + quick turnaround!
Chiara Iodice
I work as a graphic designer in the film and tv industry and Cian and his team have been great at handling our sometimes strange and time sensitive requests for sets and props.
Jess Lockhart
FAQs
A microphone flag is the square four sided block that sits at the top of a microphone handle and carries your logo. It is what puts your branding in every shot of an interview. It is not the foam cover that goes over the microphone itself.
People use both words for it, and this is the product they usually mean: a branded block that sits on the handle, below the head of the microphone. It is not a foam windshield that goes over the top, and we do not make those.
Two days. Order by 5pm on a Tuesday and it is ready on the Thursday for collection in Kilcoole, or we send it out with a courier. We start production the following morning. Standard turnaround is five days.
Yes. The minimum order is one, and most orders are one or two.
Yes, all four faces are printed as standard, not two.
Yes. Logo one goes on a pair of opposite faces and logo two on the other pair, so both are in shot whichever way the microphone turns. It is how people run their own logo alongside a broadcaster's or a sponsor's.
The hole takes a microphone body up to 42mm thick, and the foam inside grips the handle as it slides on. It is sized around an SM58, the microphone most people already own, so anything around that size will fit. Each printed face is 70mm square. Check your microphone before you order.
Not directly. Our machines cannot print around a corner. If you need a solid colour on every face we print the base colour onto vinyl, wrap it around the flag and print your logo on top. It runs on its own turnarounds, three days instead of two or six instead of five. Tell us when you order rather than after.
Vector artwork. On a black base we print a white layer of ink first and your logo over it, so the colours hold. On a two day turnaround the artwork has to be right first time, because a day spent going back and forward on a file comes out of production time.
A mic flag and a curved backdrop between them make a portable interview studio. The flag brands everything in front of the camera and the backdrop brands everything behind the person answering, and both pack down into a car boot.
Yes. If your microphone hangs upside down on a boom, which most podcast setups do, flip the flag around and it reads the right way up on camera.
Design Guidelines
To start, select the product size, preview the design guidelines, download the guidelines for reference, and proceed with the customisation options.




