Printed magnetic signs on the side of a pink stretch limousine, with a woman in a green coat posing beside it

Magnetic signs let you brand a vehicle without committing to permanent vinyl. Stick them on when you need them, peel them off when you don't. No residue, no damage to the paintwork, no drama.

We print them on vehicle-grade magnetic material, which is thicker and stronger than the stuff fridge magnets are made from, with laminated, fade-resistant inks. We round the corners as standard. That stops the wind catching an edge and lifting the sign off at speed.

Check your vehicle first

Magnetic signs only work on steel panels. If your vehicle has plastic or aluminium bodywork, they won't stick, and that's more common on newer cars and vans than you'd think.

There's no halfway point. Either the magnet grips or it doesn't.

If you're local, drop in to us and we'll test it with a sample. If you're not nearby, grab a fridge magnet and stick it on the panel where you want the sign to go. If it holds, you're good. If it slides off, magnetic signs aren't going to work for you.

Who uses magnetic vehicle signs

Tradespeople with leased vans. You can't wrap a van you don't own. Even if the leasing company allows vinyl, you'll pay to have it taken off at the end. Magnetic signs get round that: full branding on the doors without the commitment.

Festival and event security. We've done vehicle sets for security teams working music festivals: hired vans that need to be clearly marked for a few days, then go back unmarked. Same for event production crews and catering suppliers bringing goods on site.

Dual-use vehicles. The pizza delivery van that's someone's own car during the week. The taxi driver who doesn't want permanent signage on a private car. The plumber's van that doubles as the family car at weekends.

Trailers and towed units. They work on any steel surface, so they suit box trailers, catering units and mobile equipment where you want branding you can swap out.

One-off branding jobs. We once branded a pink limo for Bingo Loco for a weekend. The signs went on Friday, came off Sunday, job done. We can personalise each sign individually too, which is useful if you need car numbers or driver names for identification.

We use them ourselves. Our delivery driver puts a set on his van when he's doing drops at festivals.

How wind lifts magnetic signs, and how to stop it

Wind is the enemy. If air gets under a magnetic sign at speed, it'll lift off and you'll lose it.

That happens for a few reasons:

  • The surface wasn't clean. Grit or dirt between the sign and the paintwork leaves tiny air gaps. Always wipe the panel down before you put the sign on.
  • The sign is bridging a curve. Magnetic signs need a flat surface. If your van has a contour, crease or ridge where the sign is going, part of it won't sit flush, and that gap is where the wind gets in.
  • Sharp corners catch air. That's exactly why we round every corner as standard: it takes away the grab point where the wind starts to peel.

We only use vehicle-grade magnetic material. There's regular magnetic sheeting, which is fine indoors, and there's the thicker, stronger stuff rated for vehicles. We use the vehicle-grade material because it holds better and lasts longer.

Magnetic sign sizes

Standard sizes:

  • 1500 x 600mm
  • 1200 x 600mm
  • 900 x 600mm
  • 900 x 400mm
  • 600 x 600mm
  • 400 x 600mm
  • 300 x 600mm
  • A4 (210 x 297mm)
  • A3 (297 x 420mm)
  • A2 (420 x 594mm)
  • A1 (594 x 841mm)

Custom sizes are available, just ask. We can also die-cut magnetic signs to shape if you need something other than a rectangle (logos, speech bubbles, shaped panels). Odd shapes and signs with a small surface area are best kept for a vehicle that's parked up rather than moving.

Gloss lamination as standard

Every magnetic sign gets gloss lamination. Rain beads off it, road grime wipes off easily, and it holds up well to daily use.

We don't offer matt on these. The slight texture holds onto dirt, and a van sign has to deal with plenty of that.

Looking after your magnetic signs

Store them flat. Rolling or folding them can crease the magnetic material and weaken the grip.

Keep them clean. Wipe the back as well as the front. Any grit on the magnetic side can scratch your paintwork when you put them on.

Don't leave them on permanently. If a magnetic sign stays in the same spot for months, it can leave a faint outline, because the paint underneath hasn't faded at the same rate as the rest of the vehicle. That isn't damage, it's uneven sun, but it's worth knowing. The manufacturer says not to leave them on in temperatures over 35 degrees or under minus 15 degrees. In Ireland, we don't need to worry about that just yet.

Some people store them stuck to the inside of the van when they're not in use. Keeps them flat and out of the way.

How long magnetic signs take

3 working days, or next working day if you're stuck for time. Pick your speed on the calculator. If it's a big order, give us a call.

Artwork for magnetic signs

We need a print-ready PDF or high-resolution image files, 300dpi at final size. Unsure whether your file will do? Send it over and we'll check it for you.

If you want the sign die-cut to a shape, put the cut path on a separate layer. Remember that sharp corners and odd shapes won't hold up as well against the wind once the vehicle is moving.

Printing Options
Incl. VAT
Printing Cost:€99.90
Printing Cost(Including VAT): €122.88
Cost Per Unit:€99.90
Cost Per Unit:€122.88
Please enter Eircode
Estimated Total:€99.90

Place your order within

00HRS
00MINS
00SECS

and we will dispatch your order on

Order Now

What customers say

We've used Cian at We Do Pinting for a number of years now for our print and signage needs. The service is fantastic.

Karen Brabazon

Always quick to respond and very helpful with any queries. Signage delivered in perfect condition.

The Ivory Feather

Read all our reviews

FAQs

No, as long as you keep them clean and take them off regularly. Grit on the magnetic side can scratch the paintwork, and a sign left in one spot for months can leave a faint outline where the paint around it has faded in the sun.

Yes, on a clean, flat steel panel. Wind lifts them when there's grit under the sign, when it bridges a curve or crease, or when a sharp corner catches the air. That's why we round every corner as standard.

Only if the panel is steel. Plastic and aluminium bodywork won't hold it, and that's more common on newer vans than you'd think. Stick a fridge magnet where the sign will go. If it slides off, magnetic signs won't work.

Yes. We die-cut them to logos, speech bubbles or shaped panels. Odd shapes and small signs are best kept for a vehicle that's parked up, because they don't hold as well against the wind once it's moving.

2 to 3 working days for most orders. For a big order, or if you need them sooner, give us a call.

Design Guidelines

Ready to create your product design?
To start, select the product size, preview the design guidelines, download the guidelines for reference, and proceed with the customisation options.
Help template cannot be generated as one or both bleed sizes (height and width) are set to 0.
Bleed Line
Safe Line